Atag HG3011CH Bedienungsanleitung PDF herunterladen (Seite 8)

8

1. Depress and turn the control knob

for the burner to the left to max.

flame . (Ignition position)

2. The ignition electrode will emit

sparks, and when the mixture of gas

and air is correct, the burner will be

ignited. If it is not possible to

connect the unit to mains, a

match may be used to ignite the

burner.

3. After starting the burner, press the

control knob for approx. 10

seconds to activate the automatic

thermo-couple (thermo sensor

ready).

5. The burner can now be regulated

between maximum and minimum.

maximum

minimum

Ignition

13

It is not necessary to attach the

reinforcement beam to the work top

surface, as it is held in place by a

specially designed moulding, which is

incorporated in the hob units flanges.

The units externally measured

length

290 mm:

Two-zone ceramic-top electric hob

Two-burner gas hob

Grill

Fryer

Wok

Installation of a single unit

When mounting a single unit, be it a

half-or full size unit, in a

worktopsurface which is thicker than

30 mm, it is necessary to make a

special notch in both sides of the cut-

out hole, as shown in the adjacent

drawing.

The purpose of these notches is to

create space for the electrical cables.

4228

1 2 3 4 5 6 7 8 9 10

Kommentare zu diesen Handbüchern

Keine Kommentare